Innovators Recognized At Patent Ceremony
Outstanding creativity in science and engineering were recently honored by a U.S. congressman and senior Navy officials.
Keynote speaker U.S. Rep.
Roscoe G. Bartlett (MD-6) joined Naval Surface Warfare Center commander Rear Admiral Michael Mathis, in a ceremony recognizing Navy civilian employees. Since the previous year's ceremony, 56 current and former employees have won 30 patents for inventions associated with Carderock Division programs. These innovators are individually recognized for significant contributions to the U.S. Navy. At the same time, 19 first-time inventors are being recognized specially by induction into the Carderock Inventors Club, a command honor society celebrating the issuance of the first U.S. patent bearing a Navy civilian inventor's name. In addition, 59 employees will be recognized as a group as inventors of 45 patent applications filed during the same period.
Patented technologies include ceramic and composite materials, magnetostrictive materials, impact absorbing materials, ship propulsion systems, ship machinery, ship control surfaces, acoustic apparatus, radar equipment and test equipment and methods. With only 2,000 scientists and engineers, the Carderock Division ranks third in the U.S. Navy for patents. Following are full details on two particularly promising ideas. (For a full listing, please turn to page 93).
Combined Wedge-Flap for Improved Ship Powering United States Patent No. 6.038,995, Cusanelli, D.S., and G. Karafiath, (March 21, 2000) A stern flap is an extension of the hull bottom surface which extends aft of the transom. It is a relatively small appendage, built of plate, fitted to the ship's transom. Unlike a stern flap that extends aft of the transom, wedges are located completely under the hull beneath the t r a n s om (inlayed into the hull plating).
The critical geometry parameters for both wedges and flaps are chord length, span across the transom, and angle.
T r a n s om wedges and stern flaps are very similar, and also operate along similar principles, and as thus, were previously viewed as exclusive devices.
A wedge-flap design program was initiated in 1996, when it was rationalized that the combination of a wedge and a flap might prove beneficial. This program represented the initial model-scale evaluation of a wedge and flap combination, as shown on page 62. The combination of the two concepts, named the integrated wedge-flap, initiates forward of the transom under the hull (wedge portion) and extends aft of the transom (flap portion). It was shown, through model testing, that a stern flap, installed in addition to a hull's existing wedge, could further reduce the powering requirements. U.S. patent No.
6,038,995 was issued to Cusanelli and Karafiath for this design concept.
The stern flap portion (alone) of the integrated wedge-flap, was retrofit to the Ramage (DDG 61), in 2000. This ship is an Arleigh Burke (DDG 51) Class, Flight I, destroyer, which was built with an inlayed stern wedge. A photograph of the Ramage installation was not available, however, the equivalent design on a sister ship, the Curtis Wilbur (DDG 54), as shown on page 62.
The stern flap trials on Ramage were recently completed in December 2000.
The results indicate that the flap, for all speeds tested, substantially reduced delivered power by 5-15 percent, while top speed was increased by 0.9 knots.
Projected net annual fuel savings will be over 4,700 barrels (7.5 percent reduction), with a total fuel cost savings of $195,000 per ship. Fabrication and installation cost was $160,000, indicating that the period for return of investment cost will be less than one year.
Foil Assisted Towing System An improvement in delivering cargo could revolutionize littoral warfare and generate cost savings for the Navy. The new concept borrows ideas from trucks and hydrofoils.
Foil Assisted Towing System (FATS) permits the close coupled towing of craft or other payloads using partial hydrofoil support. Conceptionally, the towing method is analogous to a highway tractor-trailer rig, which is supported on the front by the transom of the towing craft. A hydrofoil supports the aft end of the trailer. This concept has the advantages of hydrofoils while avoiding their faults-motion control, stability, propulsion, spray, complexity, etc. The program's goal: building a scale model FATS and successfully demonstrating it in a real, operational environment. Combatant Craft Department (CCD) personnel who worked on the project were: John Almeter. Jason Marshall and Dennis Bushey (all of Code 23). Additionally, they have applied for a patent.
A FATS could be used for towing small equipment and cargo. The towed item is semi-rigidly attached to the towing craft at the stern in manner similar to that of a tractor-trailer rig. The transom of the towing craft supports a small percentage of the weight of the towed craft.
When being towed at high speed, a hydrofoil supports the majority of the towed weight. At slower speeds, hydrostatic forces support the towed craft.
Large high-speed craft can use this concept to tow boats, equipment, cargo and fuel bladders. However, using this approach it is questionable whether it would ever be practical to tow thousands of tons of cargo. Specific requirements would determine applicability.
Since it can have extremely low resis- tance when on foil, the hydrofoil is an attractive option. The low resistance translates to smaller horsepower requirements and fuel consumption.
Various problems have prevented the hydrofoils from being widely used. For example, control and stability are major problems. Propelling a hydrofoil can be extremely difficult. Struts can generate a large amount of spray, which strike the craft, increasing its drag. In practice, the hydrofoil's simple concept presents a challenge in actual working environments.
Problems are often avoided by using a hybrid hydrofoil craft, which is part hydrofoil and part some other type of craft. Examples include Techno- Superliner, Super Shuttle 400 and Foilcat 2900. Hybrid Hydrofoils have been in operation in Russia for decades.
Their Turya and Matka class of craft - with a 250 ton displacement - is a mix of semi-planing hull and a hydrofoil. The bottom of the craft itself supports the aft end of the craft; a hydrofoil supports the forward end. Providing stability and control, this approach allows a conven- tional inboard propeller propulsion.
Some could argue that the FATS is a hybrid hydrofoil system. The bottom of the towed craft supports the forward end. A hydrofoil supports the back end.
However, FATS is different because hydrofoils have not been towed before by a conventional monohull. This application is unique because previous hybrid hydrofoils were in one craft, not the tractor-trailer rig like arrangement of FATS. The connection to the towed craft provides stability and control.
Because of the towing, complex propulsion systems associated with true hydrofoils are avoided.
Other stories from June 2001 issue
- Galician Grit page: 8
- MariTel Completes Field Test of Wireless DSC VHF page: 10
- ASRY Converts Heavy-Lift Crane Ship page: 12
- Transfer of Ownership Commences at Grand Bahama Shipyard page: 12
- Hydrex Breaks Ground with Repair page: 13
- Detyens Shipyard Profits From Dredger Work page: 14
- Derecktor Signs Contracts For Two Vessels page: 15
- Rodriquez Cantieri Navali Wins $57M, 10-Boat Contract page: 16
- Rodriquez Cantieri Navali Launches Largest Fast Ferry page: 18
- Freeport Shipbuilding Delivers Aluminum Research Vessel page: 18
- Image Marine Delivers Aquacat To Blackbeard's Cruises page: 19
- VT Concludes Sandown Class page: 20
- VT Reaches Milestone With New RN Survey Ships page: 20
- EuroFerrys Takes First Auto Express 101 page: 22
- Caterpillar Introduces Compact Marine Propulsion Engines page: 24
- Jotun Expands U.S. Presence page: 26
- Maritime World Joins Together at Asia Pacific Maritime 2001 page: 28
- Camacho Returns to His Roots page: 30
- U.S. Shipbuilding Industry: A Bright Future Tempered with Challenges page: 34
- No Leg Left to Stand On - An Obituary for MarAd? page: 36
- Bordelon Marine To Christen First of Three Utility Boats page: 38
- SeaStreak Launches New High-Speed Catamaran page: 39
- Lassen (DDG 82) Commissioned In Florida page: 40
- Future Requirements for Shuttle Tankers in the Gulf page: 42
- MARCO Shipyard Delivers Ahead Of Schedule page: 47
- Shipbuilding Prices Firm Up page: 48
- Strong Market Continues page: 50
- Frozen Gas Market Heats Up page: 50
- Freight Rates To Fly High In Coming Years page: 51
- Greasing the Skids page: 56
- State of the P&I Market: As Stocks Drop, Rates Will Rise page: 58
- Innovators Recognized At Patent Ceremony page: 62
- New Launching Platform For Navy page: 63
- Tests Prove CLT Prop Characteristics page: 67
- Texas Maritime Academy Ship Simulator Attracts All Levels page: 68
- World Industry Drives Freight Rates Up page: 70
- MITAGS Chooses STN Atlas For Major Upgrade page: 73
- Superior Diesel and ALGAE-X Sign Distributor Agreement page: 78
- Incat Takes Top Honors At Cruise & Ferry page: 80
- Portland Remains New England's Largest Tonnage Port page: 81
- An Artistic Interpretation page: 84
- Rolls-Royce to Supply Podded Propulsion For QM2 page: 90
- BV Proposes 12,500-TEU Mega Containership page: 92
- Piracy Hits New Heights page: 95
- New Welding Process Put To The Test page: 96
- Analysts Predict Hutchison Whampoa Expansion Will Offer Long Term Potential page: 97
- Osprey Maritime To Sell LNG Operations For $635 Million page: 97
- Norwegian Line Unable to Remedy Leaky Sprinklers on the Norway page: 98
- Analysts Speculate Possible Carnival / Hapag-Lloyd Deal page: 98